Titanium Round Bars

• High tensile strength
• High endurance
• Corrosion resistant

• Aerospace
• Defence
• Marine

• Rugged design
• High strength
• Rust free

• AMS 4930
• MIL-F-83142A
• MIL-T-9046
• MIL-T-9047

• AMS 4930
• AMS 4931
• AMS 4956
• ASME SB-348
• ASTMF136
• MIL-T-9047

• MIL-T-9046
• AMS 4907
• ASME SB-265
• ASTM F136

• Reliable to use
• Dimensionally accurate
• Robust construction

50 mm

55 mm

60 mm

70 mm

80 mm

90 mm

100 mm

125 mm

160 mm

180 mm

200 mm

225 mm

260 mm

280 mm

300 mm

350 mm

400 mm

Chemical Analysis

CHANDAN STEEL WORLD

6AL-4V, a popular titanium alloy, is essentially composed of approximately 6% aluminum, 4% vanadium, with most of the remainder pure titanium(there are traces of several other elements). It has very high strength, but relatively low ductility. It is weldable and can be precipitation hardened. 6AL-4V is typically supplied in the annealed condition

AMS 4905, 4911, 4920, 4928, 4930, 4931, 4932, 4934, 4935, 4954, 4963, 4965, 4967, 4993, AMS-T-9046, AMS-T-81915,AS7460, AS7461
ASTM B265(5), B348(5), B367(C-5), B381(F-5), B861(5), B862(5), B863(5), F1472
AWS A5.16 (ERTi-5)
MIL SPEC MIL-T-81556

Chandan Steel World

Titanium Medical Specifications
ASTM F-67 Unalloyed titanium for implant applications
ASTM F-136 6AL4V Eli for surgical implant applications
ASTM F-1341 CP Wire for implants
ASTM F-1472 6AL4V for surgical implant applications
Aerospace Specifications
MIL-T 9046 Sheet/Strip/Plate 6AL4V
AMS-T-9046 Sheet/Strip/Plate 6AL4V
MIL-T 9047 Bas/Wire/Forgings/Rings 6AL4V
AMS-T-9047 Bas/Wire/Forgings/Rings 6AL4V
AMS 6931 BBas/Wire/Forgings/Rings 6AL4V
AMS 4900 Sheet/Strip/Plate Commercially Pure 55 KSI YS
AMS 4901 Sheet/Strip/Plate Commercially Pure 70KSI YS
AMS 4902 Sheet/Strip/Plate Commercially Pure 40 KSI YS
AMS 4907 Sheet/Strip/Plate 6AL4V Eli
AMS 4910 Sheet/Strip/Plate 5AL2.5SN
AMS 4921 Sheet/Strip/Plate Commercially Pure 70KSI YS
AMS 4928 Bas/Wire/Forgings/Rings/Drawn Shapes 6AL4V
AMS 4930 Bars/Wire/Forgings/Rings 6AL4V Eli
AMS 4965 Bars/Wire/Forgings/Rings 6AL4V STA
AMS 4967 Bars/Wire/Forgings/Rings 6AL4V Annealed-Heat Treatable
Industrial Specifications
ASTM B 265 GR 1 Sheet/Strip/Plate Commpercially Pure 25 KSI min YS
AMS-T-9046 Sheet/Strip/Plate 6AL4V
ASTM B 265 GR 2 Sheet/Strip/Plate Commpercially Pure 40 KSI min YS
ASTM B 265 GR 3 Sheet/Strip/Plate Commpercially Pure 55 KSI min YS
ASTM B 265 GR 4 Sheet/Strip/Plate Commpercially Pure 70 KSI min YS
ASTM B 265 GR 5 Sheet/Strip/Plate 6AL4V
ASTM B 265 GR 23 Sheet/Strip/Plate 6AL4V Eli
ASTM B 861 Seamless Pipe
ASTM B 862 Welded Pipe
ASTM B 338 Grade 2 Seamless and Welding Tubing Commercially Pure 40 KSI min YS
ASTM B 348 GR 1 Bars and Billets Commercially Pure 25 KSI min YS
ASTM B 348 GR 2 Bars and Billets Commercially Pure 40 KSI min YS
ASTM B 348 GR 3 Bars and Billets Commercially Pure 50 KSI min YS
ASTM B 348 GR 4 Bars and Billets Commercially Pure 70 KSI min YS
ASTM B 348 GR 5 Bars and Billets 6AL4V
ASTM B 363 Fittings
ASTM B 367 Castings
ASTM B381 Forgings
ASME SB 265 Sheet/Strip/Plate Commercially Pure and Alloyed
ASME SB 861 Seamless Pipe
ASME SB 862 Welded Pipe
ASME SB 348 Bars and Billets Commercially Pure and Alloyed

Industry Specifications:

ASTM
AMS 4911
AMS 4928
B265 Grade 5
B348 Grade 5
F467 Grade 5
F468 Grade 5

Ti-6-4 UNS R56400 ASTM Grade 5 titanium UNS R56401 (ELI)

Chandan Steel World:

Principal uses : Airframe and turbine engine parts (blades, discs, wheels, spacer rings), ordnance equipment, pressure vessels, and rockets motor cases

Available Forms:Sheet, strip, plate, bar, billet, wire, and extrusions

Type Structure : Alpha-Beta

Subcategory: Alpha/Beta Titanium Alloy; Metal; Nonferrous Metal; Titanium Alloy

Close Analogs: 4 other heat treatments of this alloy are listed in MatWeb.

Key Words: Ti-6-4; UNS R56400; ASTM Grade 5 titanium; UNS R56401 (ELI); Ti6Al4V, biomaterials, biomedical implants, biocompatibility

Material Notes:
Information provided by Chandan and the references. Annealing Temperature 700-785ºC. Alpha-Beta Alloy

Applications: Blades, discs, rings, airframe, fasteners, components. Vessels, cases, hubs, forgings.. Biomedical implants.

Biocompatibility: Excellent, especially when direct contact with tissue or bone is required. Ti-6Al-4V's poor shear strength makes it undesirable for bone screws or plates. It also has poor surface wear properties and tends to seize when in sliding contact with itself and other metals. Surface treatments such as nitriding and oxidizing can improve the surface wear properties.

Spec: AMS 4928

6AL-4V Titanium Bar AMS 4928
UNS R56400

Nominal Composition

Titanium 90%
Aluminum 6%
Vanadium 4%
Carbon < 0.10%
Oxygen < 0.20%
Nitrogen < 0.05%
Hydrogen < 0.0125%
Iron < 0.3%

Description

6AL-4V titanium alloy (Grade 5) is the most widely used titanium grade. Its high strength, light weight and corrosion resistance enables Ti 6-4 to be used in many applications. The most common market is aerospace. The alloy is also age hardenable by heat treatment to achieve even higher strengths. Some applications include compressor blades, discs, and rings for jet engines; airframe components; pressure vessels; rocket engine cases; helicopter rotor hubs and critical forgings requiring high strength-to-weight ratios.
Properties

Non-magnetic. A two-phase alloy, containing both alpha and beta phase crystalline structures. This high strength alloy can be used at cryogenic temperatures to about 800°F (427°C). AMS 4928 requires 120,000 psi minimum yield strength at room temperature. 6AL-4V titanium can be used in the annealed condition or in the solution treated and aged condition. 6Al-4V titanium has outstanding corrosion resistance to most media including nitric acid in all concentrations to boiling point; seawater; and to alkalis in all concentrations to boiling point. Stress corrosion cracking may occur if chlorine salts are present on stressed parts subsequently subjected to high temperatures. 6Al-4V titanium has acceptable oxidation resistance up to 1000°F (538°C).

Hardness

Hardness of Aerodyne stock is typically 300 BHN. The strength and hardness of the mill-annealed product may be increased by approximately 20% after an aging heat treatment. After aging at 975-1025°F (524-552°C), the typical yield strength is 150,000 psi and typical hardness is 360 BHN.
Machinability

RATING:
22% of B-1112

TYPICAL STOCK REMOVAL RATE:
30 surface feet/minute

COMMENTS:
Tooling should consist of tungsten carbide designations C1-C4 or cobalt type high speed tools. Generally, machining characteristics are similar to those of austenitic stainless steels. 6Al-4V titanium can be machined using slow speeds, high feed rates, rigid tooling, and flooding the workpiece with non-chlorinated cutting fluid.

Density:

0.160 lbs/in3, 4.47 g/cm3

Standard Inventory Specifications
AMS 4928
PWA S-4928
MIL-T-9047G
Capable of AMS 4965 and 4967 (4” and smaller)
ASTM B348-8 Grade 5
Line marked over 0.5 inches in diameter
Predominantly produced by double vacuum melt. Hot rolled, annealed, then centerless ground or rough turned.
Lengths: 10 – 12 feet

Ti6Al4V is a two phase alpha and beta grade of titanium and is the most widely used of all the titanium grades. It is supplied in the annealed condition as per AMS 4928R or BS2TA11 for ease of machinability and can be strengthened with a relatively simple heat treatment to offer very high mechanical properties.

The combination of these good mechanical properties (maintained up to ~400°C), a low density of 4.42 g/cm3 and a very good corrosion resistance make Ti-6Al-4V ideal for applications in the aerospace, marine, offshore oil & gas and motorsport industries.

• 2TA11
• 3TA11
• R56400
• AMS 4928
• AMS 4967
• ASTM B348 (Grade 5)
• 3.7164
• 3.7165

Ti rem, Al 6%, V 4%, Fe 0.3% max

• Very high strength
• Good corrosion resistance
• Excellent strength to weight ratio
• High strength at cryogenic temperatures
• Good weldability

Aerospace | Compressor blades, discs and rings for jet engines; airframe components, fasteners, rocket engine cases, helicopter rotor blades and critical forgings

Offshore & marine | Offshore tubulars and oil and gas equipment

Other | Biomedical implants and chemical processing equipment

Titanium Grade 12 is similar to Grade 2 and Grade 3 except Grade 12 has the addition of Mo and Ni. These additions to Grade 12 offer a lower cost option than the Palladium bearing grades. Grade 12 has high strength, good heat and wear resistance and is highly weldable. Grade 12 is used for Chemical Processing, Power generation, Desalination, Marine Hydrocarbon processing and Mining

Availability
Titanium Grade 12 is available in Bar, Billet, Extrusion, Plate, Sheet, Strip, Wire, Forging Stock, Pipe and Tube. For all stock and size availability contact Sales.

Specifications
UNS R53401
ASTM B265 Gr12 Sheet/plate
ASTM B337 Gr12 pipe (withdrawn)
ASTM B338 Gr12 heat exchange tube*
ASTM B348 Gr12 bar
ASTM B367 Gr12 castings
ASTM B381 Gr12 forgings
ASTM F467 Gr12 nuts
ASTM F468 Gr12 bolts

Services
At Chandan Steel we specialise in the rapid turn-around of orders, with most stock items ready for shipping out the same day to anywhere in the world. For time-critical orders, such as AOGs use our AOG service desk

The team are dedicated to processing and dispatching orders on the same day, even for cutting orders on bar and sheet products.

Our expertise in global logistics enables us to source material from anywhere in the world in a matter of days and provide fast shipping solutions to all our customers, whichever country they are in.

Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.

Titanium Grade 7 is mechanically and physically equivalent to CP grade 2, but with the addition of palladium. The addition of palladium gives grade 7 enhanced crevice corrosion resistance at low temperatures and high PH and is the most corrosion resistant of all titanium alloys.

Availability
Titanium CP Grade 7 is available in: Bar, Billet, Extrusion, Plate, Sheet, Strip, Wire, Forging Stock, Pipe and Tube. For all stock and size availability contactSales.

Specifications
ASTM B265 Gr7 Sheet/plate
ASTM B337 Gr7 pipe (withdrawn)
ASTM B338 Gr7 heat exchange tube*
ASTM B348 Gr7 bar
ASTM B367 Gr7 castings
ASTM B381 Gr7 forgings
ASTM F467 Gr7 nuts
ASTM F468 Gr7 bolts

Services
Chandan Steel Wolrd we specialise in the rapid turn-around of orders, with most stock items ready for shipping out the same day to anywhere in the world. For time-critical orders, such as AOGs use our AOG service desk

, the team are dedicated to processing and dispatching orders on the same day, even for cutting orders on bar and sheet products.

Our expertise in global logistics enables us to source material from anywhere in the world in a matter of days and provide fast shipping solutions to all our customers.

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.

Titanium Grade 12 is similar to Grade 2 and Grade 3 except Grade 12 has the addition of Mo and Ni. These additions to Grade 12 offer a lower cost option than the Palladium bearing grades. Grade 12 has high strength, good heat and wear resistance and is highly weldable. Grade 12 is used for Chemical Processing, Power generation, Desalination, Marine Hydrocarbon processing and Mining

Availability

Titanium Grade 12 is available in Bar, Billet, Extrusion, Plate, Sheet, Strip, Wire, Forging Stock, Pipe and Tube. For all stock and size availability contact Sales.

Specifications

UNS R53401
ASTM B265 Gr12 Sheet/plate
ASTM B337 Gr12 pipe (withdrawn)
ASTM B338 Gr12 heat exchange tube*
ASTM B348 Gr12 bar
ASTM B367 Gr12 castings
ASTM B381 Gr12 forgings
ASTM F467 Gr12 nuts
ASTM F468 Gr12 bolts

Services
At Chandan Steel we specialise in the rapid turn-around of orders, with most stock items ready for shipping out the same day to anywhere in the world. For time-critical orders, such as AOGs use our AOG service desk

The team are dedicated to processing and dispatching orders on the same day, even for cutting orders on bar and sheet products.

Our expertise in global logistics enables us to source material from anywhere in the world in a matter of days and provide fast shipping solutions to all our customers, whichever country they are in.

Disclaimer

Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.

Titanium Grade 23 is similar to Grade 5 but has lower oxygen, nitrogen and iron. It has better ductility and fracture toughness that Titanium Grade 5.

• Excellent in Saltwater Environments
• Improved Ductility
• Extended Durability Titanium

We stock and sell Titanium Grade 23 in bar, forgings, plate, sheet, welding wire & wire in this grade.

• Temperature Resistance
• High Tensile Strength
• Durability