Chandan Steel World
Chandan Steel World
C. P. Tank, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Stainless Steel Round Bars

Leading Importer of 15-5ph condition h1025 round bar uns s 15500, 17-4ph (h1025, uns s17400) din: 1.4542 bars, ph13-8mo ams 5629, 15-5ph stainless steel (ams 5659/ ams 5862) bars, 13 8ph round bars and 13-8 mo round bars uns s13800 from Mumbai.

15-5PH Condition H1025 Round Bar UNS S 15500

15-5PH Condition H1025 Round Bar UNS S 15500
  • 15-5PH Condition H1025 Round Bar UNS S 15500
Get Best Quote
Approx. Price: Rs 300 / Kilogram
Backed by a diligent team of professionals, we have been able to provide a wide range of 15-5PH Condition H1025 Round Bar UNS S 15500. Offered round bar contain high carbide content which results in high wear resistance of these bars. This round bar is made using high grade stainless steel so as to meet the set norms of industry. As well, patrons can avail the offered round bar from us at reasonable prices.

Features:

  • High strength
  • Industry proven design
  • Anti-corrosive

Specifications:

Chemical Composition Limits

Weight%

C

Si

Mn

P S max

Cr

Ni

Cu

Cb

Fe

Mo

AMS 5659
15-5

0.07

1.0

1.0

0.03P
0.015S

14.0-15.50

3.50-4.50

2.50-4.50

0.45

Bal

0.50

Material

Condition

Ultimate Tensile Strength (ksi)

0.2 % Yield Strength (ksi)

Elongation % in 2D

% Reduction of Area

Rockwell C Hardness

Alloy 15-5 PH
Bar AMS 5659

Cond A

-

-

-

-

363 HB max

Alloy 15-5 PH
Bar AMS 5659

H900

190

170

10

35

388-444

Alloy 15-5 PH
Bar AMS 5659

H925

170

155

10

38

375-429

Alloy 15-5 PH
Bar AMS 5659

H1025

155

145

12

45

331-401

Alloy 15-5 PH
Bar AMS 5659

H1075

145

125

13

45

311-375

Alloy 15-5 PH
Bar AMS 5659

H1100

140

115

14

45

302-363

Alloy 15-5 PH
Bar AMS 5659

H1150

135

105

16

50

277-352


Request
Callback


Additional Information:

  • Minimum Order Quantity: 0 Kilogram
Yes! I am interested

17-4PH (H1025, UNS S17400) DIN: 1.4542 Bars

17-4PH (H1025, UNS S17400) DIN: 1.4542 Bars
  • 17-4PH (H1025, UNS S17400) DIN: 1.4542 Bars
Get Best Quote
Approx. Price: Rs 260 / Kilogram
General Properties

Alloy 17-4 is a chromium-copper precipitation hardening stainless steel that is used for applications requiring high strength and a moderate level of corrosion resistance. It is one of the most widely used precipitation hardening grades, as it has high strength hardness up to about 572°F while demonstrating good corrosion resistance in all heat treated conditions. Alloy 17-4 has adequate resistance to atmospheric corrosion or in diluted acid salts where its corrosion resistance is equivalent to Alloy 304 or 430. Alloy 17-4 can be heat treated to a variety of temperatures to develop a wide range of properties. Its mechanical properties can be optimized with heat treatment where very high yield strength up to 180 ksi can be achieved. Alloy 17-4 should not be used at temperatures above 572°F or at very low temperatures.

Specifications: UNS S17400

Applications:

Chandan Steel World Alloy 17-4 is commonly used for applications requiring high strength and a moderate level of corrosion resistance. Some applications that frequently use Alloy 17-4 include:

  • Aircraft
  • Nuclear waste casks
  • Paper mills
  • Oil fields
  • Mechanical components
  • Chemical process components
  • Food industry
  • Aerospace
Standards:
  • ASTM/ASME: UNS S17400
  • EURONORM: X5CrNiCuNb16.4
  • AFNOR: Z6CNU17-04
  • DIN: 1.4542
Request
Callback


Additional Information:

  • Minimum Order Quantity: 0 Kilogram
Yes! I am interested

PH13-8MO AMS 5629

PH13-8MO AMS 5629
  • PH13-8MO AMS 5629
Ask For Price
With an increased proportion of technology, we are offering a qualitative assortment of PH13-8MO AMS 5629 Stainless Steel Bar. The offered steel bar is widely used in various industrial applications with usage of best quality material that are procured form the certified dealers in the market. As well, our offered steel bar is used where strengthening is required and forms a vital part of the construction. Our customers can avail this steel bar from us at best market rates in a given time frame.Features: Finely finishedNon-corrosivePrecision-designedSpecifications: PH 13-8 Mo AMS 5629 - Bars, forgings, rings, and extrusionsPH 13-8 Mo AMS 5864 - PlatePhysical Properties: Melting Range: 2,560 to 2,680F (1,404 to 1,471C)Density: 0.279 lbs/in3
Request
Callback
Yes! I am interested

15-5PH Stainless Steel (AMS 5659/ AMS 5862) Bars

15-5PH Stainless Steel (AMS 5659/ AMS 5862) Bars
  • 15-5PH Stainless Steel (AMS 5659/ AMS 5862) Bars
Get Best Quote
Approx. Price: Rs 320 / Kilogram

15-5 PH Stainless Steel

Specification: AMS 5862, AMS 5659, AMS 5826, ASTM A 564, ASTM SA 564, ASTM A 693,ASME SA 693, ASTM A 705, ASME SA 705var

15-5PH Precipitation Hardening Stainless Steel Alloy (S15500) is a variant of the older 17-4 PH (S17400) chromium-nickel-copper precipitation hardening stainless steel. Both alloys exhibit high strength and moderate corrosion resistance. High strength is maintained to approximately 600°F (316°C). The 15-5 PH alloy was designed to have greater toughness than 17-4 PH, especially in the through-thickness (short transverse) direction. This improved toughness is achieved by reduced delta ferrite content and control of inclusion size and shape. The composition and processing of 15-5 PH alloy is carefully controlled to minimize its content of delta ferrite, which is present in the 17-4 PH stainless steel material. Inclusion control is done by consumable electrode remelting using the electro-slag remelting (ESR) process. The 15-5 PH alloy is martensitic in structure in the annealed condition and is further strengthened by a relatively low temperature heat treatment which precipitates a copper containing phase in the alloy. Like the 17-4PH alloy, the 15-5 PH stainless steel alloy requires only a simple heat treatment; a one step process conducted at a temperature in the range 900°F (482°C) to 1150°F (621°C) depending on the combination of strength and toughness desired. A wide range of properties can be produced by this one step heat treatment. Heat treatment in the 900°F (482°C) range produces highest strength, although slightly less than those of semi-austenitic alloys like S17700 (17-7 PH) or S15700 (15-7 PH). The latter precipitation hardening alloys generally require more steps to complete heat treatment. The15-5 PH alloy is generally better-suited for plate applications than are the semi austenitic alloys.

Request
Callback


Additional Information:

  • Minimum Order Quantity: 0 Kilogram
Yes! I am interested

13 8Ph Round Bars

13 8Ph Round Bars
  • 13 8Ph Round Bars
Get Best Quote
Approx. Price: Rs 1,600 / Kilogram
On demand of our prestigious clients, we are highly engaged in offering 13 8Ph Round Bars. This round bar is manufactured in compliance with the set industrial norms and guidelines using the quality assured material. For ensuring its flawlessness, the round bar offered by us is checked by our quality checker. Our offered round bar is accessible from us on numerous specifications for meeting the demand of customers.

Features:

  • Maximum strength
  • Sturdy design
  • Rust proof

Request
Callback
Yes! I am interested

13-8 MO Round Bars UNS S13800

13-8 MO Round Bars UNS S13800
  • 13-8 MO Round Bars UNS S13800
Get Best Quote
Approx. Price: Rs 800 / Kilometer
Chandan Steel World ψ PH 13-8 Mo* stainless is a martensitic precipitation/age-hardening stainless steel capable of high strength and hardness along with good levels of resistance to both general corrosion and stress-corrosion cracking. In addition, the alloy exhibits good ductility and toughness in large sections in both the longitudinal and transverse directions. The excellent properties of PH 13-8 Mo stainless are obtained through close control of chemical composition and micro structure plus specialized melting which reduces impurities and minimizes segregation. Compared to other ferrous-based materials, this alloy offers a high level of useful mechanical properties under severe environmental conditions.
13-8 Mo stainless has good fabrication characteristics and can be age-hardened by a single low temperature treatment. Cold work prior to aging increases the aging, especially for lower aging temperatures.
13-8 Mo stainless has been used for valve parts, fittings, cold-headed and machined fasteners, shafts, landing gear parts, pins, lock washers, aircraft components, nuclear reactor components and petrochemical applications requiring resistance to stress-corrosion cracking. Generally, this alloy should be considered where high strength, toughness, corrosion resistance, and resistance to stress-corrosion cracking are required in a steel showing minimal directionality in properties.
Request
Callback


Additional Information:

  • Minimum Order Quantity: 0 Kilometer
Yes! I am interested

13-8PH Round Bars

13-8PH Round Bars
  • 13-8PH Round Bars
Ask For Price
Chandan Steel World PH 13-8 Mo* stainless is a martensitic precipitation/age-hardening stainless steel capable of high strength and hardness along with good levels of resistance to both general corrosion and stress-corrosion cracking. In addition, the alloy exhibits good ductility and toughness in large sections in both the longitudinal and transverse directions. The excellent properties of PH 13-8 Mo stainless are obtained through close control of chemical composition and micro structure plus specialized melting which reduces impurities and minimizes segregation. Compared to other ferrous-based materials, this alloy offers a high level of useful mechanical properties under severe environmental conditions.
13-8 Mo stainless has good fabrication characteristics and can be age-hardened by a single low temperature treatment. Cold work prior to aging increases the aging, especially for lower aging temperatures.
13-8 Mo stainless has been used for valve parts, fittings, cold-headed and machined fasteners, shafts, landing gear parts, pins, lock washers, aircraft components, nuclear reactor components and petrochemical applications requiring resistance to stress-corrosion cracking. Generally, this alloy should be considered where high strength, toughness, corrosion resistance, and resistance to stress-corrosion cracking are required in a steel showing minimal directionality in properties.
Request
Callback
Yes! I am interested

13.8 PH Round Bars

13.8 PH Round Bars
  • 13.8 PH Round Bars
Get Best Quote
Approx. Price: Rs 800 / Kilogram
PH 13-8 Mo* stainless is a martensitic precipitation/age-hardening stainless steel capable of high strength and hardness along with good levels of resistance to both general corrosion and stress-corrosion cracking. In addition, the alloy exhibits good ductility and toughness in large sections in both the longitudinal and transverse directions. The excellent properties of PH 13-8 Mo stainless are obtained through close control of chemical composition and micro structure plus specialized melting which reduces impurities and minimizes segregation. Compared to other ferrous-based materials, this alloy offers a high level of useful mechanical properties under severe environmental conditions.
13-8 Mo stainless has good fabrication characteristics and can be age-hardened by a single low temperature treatment. Cold work prior to aging increases the aging, especially for lower aging temperatures.
13-8 Mo stainless has been used for valve parts, fittings, cold-headed and machined fasteners, shafts, landing gear parts, pins, lock washers, aircraft components, nuclear reactor components and petrochemical applications requiring resistance to stress-corrosion cracking. Generally, this alloy should be considered where high strength, toughness, corrosion resistance, and resistance to stress-corrosion cracking are required in a steel showing minimal directionality in properties.
Request
Callback
Yes! I am interested

13.8PH H1025 Stainless Steel Round Bars

13.8PH H1025 Stainless Steel Round Bars
  • 13.8PH H1025 Stainless Steel Round Bars
Get Best Quote
Approx. Price: Rs 800 / Kilogram
13-8 Stainless Steel

13-8 PH stainless steel is a precipitation, age hardenable stainless steel. Stainless Steel 13-8's principal features are toughness, good resistance to general and stress corrosion cracking, and high strength that is developed by a single low temperature heat treatment.

Applications: SS 13-8 has been used in aircraft components such as landing gear and structural sections, valves, shafts, and components in the petrochemical and nuclear industries.

1) 13-8 PH Stainless Steel: AMS 5629, DMS 2100, STM-05-602, STO160LB0013, ASTM-A564 (XM-13), AMS 5864, BMS7-322, RMS 150, PWA/LCS, GE S400, AMS-H-6875, AMS 2759, AISI 632, ASTM-A693 (XM-13), ASTM-A705 (XM-13), DIN 1.4534, UNS S13800, Werkstoff 1.4548

13-8 Solution Annealed Round Bar Per AMS 5629 Type 1 (Heat treated to H1025)

13-8 Stainless Steel Plate Per AMS 5629, ASTM A-564/693, AMS 5864

13-8 Stainless Steel Flat Bar Per AMS 5629, Can be heat treated to H1000 Per AMS 2759/3 DMS 2100

13-8 Stainless Steel Round Bar Per AMS 5629, Can be heat treated to H1000 Per AMS 2759/3

UNS S13800, Capable of ASTM-A564, Centerless Ground Bar

13-8 Stainless Steel Square Bar Per AMS 5268

13-8 Stainless Steel Hex Bar Per AMS 5268

All of our 13-8 PH stainless steel is ordered to specific thickness. We supply 13-8 PH stainless steel and are capable of fulfilling your required lengths and widths. CHANDAN STEEL WORLD. also has a stocking program to support long term contract for your 13-8 PH stainless steel needs.
Request
Callback


Additional Information:

  • Minimum Order Quantity: 0 Kilogram
Yes! I am interested

15-5 PH Round Bars

15-5 PH Round Bars
  • 15-5 PH Round Bars
Get Best Quote
Approx. Price: Rs 350 / Kilogram
Stainless steel 15-5 PH*15-5 PH is a stainless steel offering high strength and hardness with excellent corrosion resistance. Stainless Steel 15-5 PH can be age-hardened by a low temperature treatment. Stainless Steel 15-5 PH has been used for applications for requiring high strength and toughness, such as valve parts, fitting, and fasteners, gears, engine parts, paper mill equipment, and aircraft components. Available forms are seamless pipe, welded pipe, sea
Request
Callback
Yes! I am interested

15-5 PH Sheet(Stainless Steel Sheets)

15-5 PH Sheet(Stainless Steel Sheets)
  • 15-5 PH Sheet(Stainless Steel Sheets)
Get Best Quote
Approx. Price: Rs 1,000 / Kilogram
15-5 PH Sheet

15-5 precipitation hardened (PH) stainless steel sheet exhibits good transverse strength and fatigue resistance as well as good corrosion resistance. It is a cost-effective material, offering many of the same properties as more expensive high-nickel, non-ferrous alloys. Its high performance in high wear, corrosive environments make it a popular material for many industrial applications, especially for the aerospace, food service, metalworking, chemical and petrochemical industries.

While inherently strong and durable, 15-5 PH stainless steel can be further strengthened with a three-step heat-treatment process. The first step is to condition the metal using austenite. Step two is to allow the metal to cool until the austenite turns to martensite. The final step is to precipitation-harden the stainless steel until it reaches one of eight standard conditions - H 900, H 925, H 1025, H 1075, H 1100, H 1150, H 1150 1150 or H 1150-M. Precipitation hardened stainless steel alloys exhibit improved strength, corrosion resistance, superior durability and performance under heat and stress.

For applications that require performance in high heat conditions, 15-5 PH can be heat treated after it has been precipitation hardened to provide improved resistance to stress corrosion cracking at high temperatures. In order to minimize distortion and stress in the finished product, fabrication is recommended after the metal has been heat treated.

The chemical composition of 15-5 PH is:

  • Chromium: between 14.0 and 15.50 percent
  • Nickel: between 3.50 and 5.50 percent
  • Copper: between 2.50 and 4.50 percent
  • Columbium plus Tantalum: between 0.15 and 0.45 percent
  • Manganese: up to 1.00 percent
  • Silicon: up to 1.00 percent
  • Carbon: up to 0.07 percent
  • Phosphorus: up to 0.04 percent
  • Sulfur: up to 0.03 percent

At Chandan Steel World, we offer 15-5 PH stainless steel sheet in two configurations - ASTM-A-693, BMS 7-240 and AMS 5862.

15-5 PH stainless steel sheet is a high performance material and is used for many applications in the aerospace, food processing, metalworking, chemical and petrochemical industries. Products manufactured using 15-5 PH stainless steel include valves, fittings, fasteners, washers, shafts and gears. If you would like to inquire about pricing levels for Altemp Alloys 15-5 PH sheet, please contact one of our in-house product specialists.

Request
Callback
Yes! I am interested

15-5 PH Stainless Steel Round Bar

15-5 PH Stainless Steel Round Bar
  • 15-5 PH Stainless Steel Round Bar
Get Best Quote
Approx. Price: Rs 270 / Kilogram
15-5 PH Stainless Steel

15-5 PH® is a martensitic, precipitation hardening stainless steel. Good in corrosive, high-pressure environments, it is ideally suited for several industries, including aerospace, petrochemical, chemical and food processing. 15-5 PH stainless steel offers exceptional performance for applications such as gears, shafts, fittings, valves and fasteners. In addition to corrosion resistant properties, 15-5 PH has good strength, transverse toughness and ductility in comparison to 304 stainless steel.

Chandan Steel World offers 15-5 PH UNS S15500 in:

15-5 PH ShapesSpecifications /
Configurations
Additional Info
PlateAMS 5862
BMS 7-240
REQUEST A QUOTE
Bar/ForgingAMS 5659
ASTM-A-484
ASTM-A-564

 

Composition of 15-5 PH Stainless Steel

The composition of 15-5 PH stainless steel includes high levels of chromium, nickel and copper. Carbon, manganese, phosphorus, sulfur, silicon and columbium plus tantalum may also be present in trace amounts, with each not exceeding 1 percent of the compositional total.

Heat Treated 15-5 PH Stainless Steel

Heat treatments are used to strengthen 15-5 alloys. There are eight standard conditions for 15-5 stainless steel after treatment - H 900, H 925, H 1025, H 1075, H 1100, H 1150, H 1150 1150 and H 1150-M. Heat treating 15-5 PH follows the following steps:

  1. Conditioning using austenite.
  2. Air cooling, which turns the austenite into martensite.
  3. Precipitation hardening until the desired condition is reached.

15-5 PH can be further heat-treated when in precipitation-hardened condition to provide improved resistance to stress corrosion cracking for high temperature applications. Fabrication is recommended after the metal has been heat treated to minimize distortion and stress.

 

 

Request
Callback
Yes! I am interested

15-5 Ph H1025 Stainless Steel Round Bar

15-5 Ph H1025 Stainless Steel Round Bar
  • 15-5 Ph H1025 Stainless Steel Round Bar
Get Best Quote
Approx. Price: Rs 300 / Kilogram
RECIPITATION HARDENING STAINLESS STEEL 15-5PH ROUND BARS:

Stainless steel 15 – 5 PH, also known as UNS S15500 or XM-12, is a modification of 17-4 PH developed in the 60′s. UNS S15500 stainless steel has a more refined microstructure as a result of the remelting process in which it was developed. This refined structure enhances toughness, especially in the transverse direction of the material. UNS S15500 also has excellent corrosion resistance, good fabricating characteristics and low temperature hardening which makes Stainless Steel 15 – 5 PH® the preferred alloy for many industries.


The composition of UNS S15500 includes small amounts of carbon, manganese, phosphorus, columbium (or niobium), tantalum, silicon and sulphur. 15500 can be forged, welded and formed. Machining may be performed in the solution-annealed state or in the final heat treat condition. Desired mechanical properties such as ductility and strength can be achieved through heating the material at various temperatures.


UNS S15500 is a martensitic precipitation hardening grade. Martensitic stainless steels were designed as a type of alloy which is corrosion resistant and could also be hardened through heat treatment.


HEAT TREATED PRECIPITATION HARDENING STAINLESS STEEL 15-5PH ROUND BARS :

Heat treatments are used to strengthen 15-5 alloys. There are eight standard conditions for 15-5 stainless steel after treatment - H 900, H 925, H 1025, H 1075, H 1100, H 1150 and H 1150-M. Heat treating 15-5 PH follows the following steps:

  • Conditioning using austenite.
  • Air cooling, which turns the austenite into martensitic.
  • Precipitation hardening until the desired condition is reached.

Chandan Steel World provides the following 15-5ph products as below:-

  • Conditioning using austenite.
  • Air cooling, which turns the austenite into martensitic.
  • Precipitation hardening until the desired condition is reached.

Chandan Steel World provides the following 15-5ph products as below:-

  • Sheet and Plate
    • AMS 5862
    • BMS 7-240
  • Bar/Forging
    • AMS 5659
    • ASTM-A-484
    • ASTM-A-564

15-5 PH can be further heat-treated when in precipitation-hardened condition to provide improved resistance to stress corrosion cracking for high temperature applications. Fabrication is recommended after the metal has been heat treated to minimize distortion and stress.


Industries that use 15500 include:
  • Aerospace
  • Chemical
  • Food processing
  • General metal working
  • Paper industries
  • Petrochemical

Products partially or completely constructed of 15500 include:
  • Aircraft components
  • Cylinders
  • Engine parts
  • Fittings
  • Gears
  • Hallow shafts
  • Marine gas turbine compressor sections
  • Paper mill equipment
  • Shafts
  • Valves
Request
Callback


Additional Information:

  • Minimum Order Quantity: 0 Kilogram
Yes! I am interested

15-5PH AMS 5659 Round Bars

15-5PH AMS 5659 Round Bars
  • 15-5PH AMS 5659 Round Bars
Get Best Quote
Approx. Price: Rs 300 / Kilogram
Chandan Steel 15-5 PH® is a martensitic precipitation-hardening stainless steel that provides high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C) and good toughness in both the longitudinal and transverse directions in both base metal and welds. Short-time, low-temperature heat treatments minimize distortion and scaling. AK Steel 15-5 PH is the ferrite-free version of AK Steel 17-4 PH Stainless Steel. Both alloys are widely used in the aerospace, chemical, petrochemical, food processing, paper and general metalworking industries.
STANDARD HEAT TREATMENTS
Chandan Steel 15-5 PH Stainless Steel is supplied from the mill in Condition A, ready for fabrication and subsequent heat treatment by the user. Eight standard heat treatments have been developed to provide a wide range of properties to meet specific applications: H 900 H 1075 H 1150 1150 H 925 H 1100 H 1150-M H 1025 H 1150 H1025
CORROSION RESISTANCE
The general level of corrosion resistance exceeds that of Types 410 and 431, and is approximately equal to that ofChandan Steel 17-4 PH Stainless Steel as indicated by laboratory tests in both strongly oxidizing and reducing media, as well as by atmospheric exposures. The general level of corrosion resistance is best in the fully hardened condition, and decreases slightly as the aging temperature is increased.
FABRICATION
Because the alloy in Condition A is strong, forming normally should be limited to mild operations. However, fabriSteel. When a weld filler is needed, AWS E/ER 630 is most often specified. Chandan Steel 15-5 PH Stainless Steel is well known in reference literature and more information can be obtained in this way. SPECIFICATIONS The following specifications are listed without revision indications. Contact ASTM Headquarters or AMS Division of SAE for latest revisions. AMS 5862 ASTM A 693 Plate, Sheet and Strip (Listed as Grade XM-12 UNS S15500) METRIC CONVERSION Data in this publication . Approximate metric equivalents may be obtained by performing the following calculations: Length (inches to millimeters) – Multiply by 25.4 Strength (ksi to megapascals or meganewtons per square meter) – Multiply by 6.8948 Temperature (Fahrenheit to Celsius) – (°Fahrenheit - 32) – Multiply by 0.5556 Density (pounds per cubic inch to kilograms per cubic meter) – Multiply by 27,670 cation can be improved greatly by heat treating before cold working or by using hot forming methods.
WELDABILITY
The precipitation hardening class of stainless steels is generally considered to be weldable by the common fusion and resistance techniques. Special consideration is required to achieve optimum mechanical properties by considering the best heat-treated conditions in which to weld and which heat treatments should follow welding. This particular alloy is generally considered to have equivalent weldability to the most common alloy of this stainless class, 17-4 PH Stainless Steel. When a weld filler is needed, AWS E/ER 630 is most often specified. AK Steel 15-5 PH Stainless Steel is well known in reference literature and more information can be obtained in this way
Request
Callback


Additional Information:

  • Minimum Order Quantity: 0 Kilogram
Yes! I am interested

15-5PH AMS Stainless Steel Round Bar

15-5PH AMS Stainless Steel Round Bar
  • 15-5PH AMS Stainless Steel Round Bar
Get Best Quote
Approx. Price: Rs 300 / Kilogram
Chandan Steel World:15-5 PH stainless steel offers high strength and hardness with excellent corrosion resistance. SS 15-5 can be age-hardened by a low temperature treatment. 15-5 PH stainless steel offers good corrosion resistance, and high strength therefore has been used for aerospace applications.

15-5 Stainless Steel Applications: Stainless Steel Alloy 15-5 is used in industrial applications, especially for the aerospace, food service, metalworking, chemical and petrochemical industries.

15-5 Stainless Steel Specifications: Alloy 15-5, Alloy 15-5 PH, 15-5 PH Stainless Steel, UNS S15500

15-5 Stainless Steel Available Forms: 15-5 Alloy Sheet, 15-5 Alloy Plate, 15-5 Alloy Bar

1) 15-5 PH Stainless Steel: AMS 5659, BMS 7-240, AMS 5862, ASTM-A564 (XM-12), PWA/LCS, GE S400

15-5 Stainless Steel Round Bar Per AMS 5659 Cond A

15-5 Stainless Steel Flat Bar Per AMS 5659 Type 1

15-5 Stainless Steel Square Bar Per AMS 5659 Type 1

15-5 Stainless Steel Hex Bar Per AMS 5659

15-5 Stainless Steel Plate, Solution Treated & Annealed Per AMS 5862, BMS 7-240 Type 1

15-5 Stainless Steel Plate, Solution Treated Per AMS 5659 Bar Specification

15-5 Stainless Steel Sheet Per AMS 5862, BMS 7-240 Type 1
Request
Callback


Additional Information:

  • Minimum Order Quantity: 0 Kilogram
Yes! I am interested

15-5ph Condition H1025 Round Bars

15-5ph Condition H1025  Round Bars
  • 15-5ph Condition H1025  Round Bars
Get Best Quote
Approx. Price: Rs 300 / Kilogram

Chemical Composition Limits

Weight%

C

Si

Mn

P S max

Cr

Ni

Cu

Cb

Fe

Mo

AMS 5659
15-5 

0.07

1.0

1.0

0.03P
0.015S

14.0-15.50

3.50-4.50

2.50-4.50

0.45

Bal

0.50

Alloy 15-5 is a precipitation hardening alloy

Material 

Condition

 

Ultimate Tensile Strength (ksi) 

0.2 % Yield Strength (ksi) 

Elongation % in 2D 

% Reduction of Area 

Rockwell C Hardness 

Alloy 15-5 PH
Bar AMS 5659

Cond A

-

-

-

-

363 HB max

Alloy 15-5 PH
Bar AMS 5659

H900

190

170

10

35

388-444

Alloy 15-5 PH
Bar AMS 5659

H925

170

155

10

38

375-429

Alloy 15-5 PH
Bar AMS 5659

H1025

155

145

12

45

331-401

Alloy 15-5 PH
Bar AMS 5659

H1075

145

125

13

45

311-375

Alloy 15-5 PH
Bar AMS 5659

H1100

140

115

14

45

302-363

Alloy 15-5 PH
Bar AMS 5659

H1150

135

105

16

50

277-352

Request
Callback
Yes! I am interested

15.5PH Round Bars

15.5PH Round Bars
  • 15.5PH Round Bars
Get Best Quote
Approx. Price: Rs 380 / Kilogram

The 15-5 alloy was designed to have greater toughness than 17-4 PH. The 15-5 alloy is martensitic in structure in the annealed condition and is further strengthened by a relatively low temperature heat treatment which precipitates a copper containing phase in the alloy. 15-5 is also referred to as XM-12 in some specifications.

 

Common Trade Names:

15-5 Stainless, 15-5 PH

 

Inventory :

15-5 Plate, 15-5 PH Round Bar, 15-5 ESR Round Bar, 15-5 VAR Round Bar

 

Specifications :

UNS S15500, ASTM A 564, ASTM A 693, ASTM A 705, AMS 5659, AMS 5862, STD 2154, ASME SA 564, SA693, SA705, Other: BAC 5439 Rev H Class A Type1, BMS7-240G Type 1, BSS7055 Rev A

 

Chemical Composition, %
Ni Cr Mn Cu Si Cb Ta C P S Fe
MIN3.514.0-2.5-0.15----
MAX5.515.51.04.51.00.450.070.040.03Balance

 

Features :
  • Precipitation Hardening
  • High Strength
  • Moderate corrosion resistance to 600°F

 

Applications :
  • Aerospace applications
  • Chemical and petrochemical applications
  • Pulp and paper
  • Food processing

 

Physical Properties :

Density: 0.280 lb/inch3
Poisson's Ratio: 0.272
Electrical Resistivity: 589 Ohm-circ mil/ft

 

Temperature, °F70200800
Coefficient of Thermal Expansion, in/in°F x 10-6--6.3
Thermal Conductivity
Btu • ft/ft2 • hr • °F
-10.6-
Modulus of Elasticity,
psi X 106
28.5--

* 70°F to indicated temperature.

Mechanical Properties

Minimum Specified Properties, ASTM A 564

Temperature, °F363 (Condition A)

ConditionH 900H 1075H 1150
0.2 Offset Yield Strength, ksi170125105
Ultimate Tensile Strength, ksi190145135
Elongation % in 2" minimum101316
Reduction of Area, %354550
Hardness, Brinell388331277

 

Chemical Analysis

C.07
Mn1.00
Ph.03
S.015
Si1.00
Cr14.00 - 15.50
Ni3.50 - 5.50
Mo.50
Cu2.50 - 4.5
Cb Ta8xc min -
Request
Callback
Yes! I am interested

17-4 PH H1025 Stainless Steels Bars

17-4 PH H1025 Stainless Steels Bars
  • 17-4 PH H1025 Stainless Steels Bars
Get Best Quote
Approx. Price: Rs 240 / Kilogram
Chandan Steel World:Alloy 17-4 is a chromium-copper precipitation hardening stainless steel that is used for applications requiring high strength and a moderate level of corrosion resistance. It is one of the most widely used precipitation hardening grades, as it has high strength hardness up to about 572°F while demonstrating good corrosion resistance in all heat treated conditions. Alloy 17-4 has adequate resistance to atmospheric corrosion or in diluted acid salts where its corrosion resistance is equivalent to Alloy 304 or 430. Alloy 17-4 can be heat treated to a variety of temperatures to develop a wide range of properties. Its mechanical properties can be optimized with heat treatment where very high yield strength up to 180 ksi can be achieved. Alloy 17-4 should not be used at temperatures above 572°F or at very low temperatures.

Specifications: UNS S17400
Applications:

Alloy 17-4 is commonly used for applications requiring high strength and a moderate level of corrosion resistance. Some applications that frequently use Alloy 17-4 include:
Aircraft
Nuclear waste casks
Paper mills
Oil fields
Mechanical components
Chemical process components
Food industry
Aerospace
Standards:
ASTM/ASME: UNS S17400
EURONORM: X5CrNiCuNb16.4
AFNOR: Z6CNU17-04
DIN: 1.4542
Request
Callback
Yes! I am interested

17-4PH Round Bar H1075

17-4PH Round Bar H1075
  • 17-4PH Round Bar H1075
Get Best Quote
Approx. Price: Rs 300 / Kilogram
Chandan Steel World:17-4 PH Stainless Steel is a precipitation hardening martensitic stainless steel. Typical usage is seen in applications requiring high strength and a modest level of corrosion resistance. Strength and toughness desired can be manipulated by temperate range in theheat treatment process.

Below you will find typical applications of 17-4 PH stainless steel as well as the metals composition and mechanical properties. Learn more about or value added services that we offer to help you expedite the current job you have at hand.

BAM offers high quality standards including: UNS S17400, AMS 5643, ASTM A564, and ASTM A693 Grade 630.

17-4 PH stainless steel can be used for a variety of applications including: pump shafts, oil path, mechanical seals, and within the aerospace industry. Its composition is carbon, chromium, columbian tantalum, copper, manganese, nickel, phosphorous, silicon, and sulfur.

 

Composition(%)
Carbon 0.070 max
Chromium 15.00 - 17.50
Columbian Tantalum 0.15 - 0.45
Copper 3.00 - 5.00
Manganese1.00 max
Nickel 3.00 - 5.00
Phosphorus 0.040 max
Silicon 1.00 max
Sulfur 0.030 max
Request
Callback
Yes! I am interested

17-4Ph Condition H1150D Round Bars

17-4Ph Condition H1150D Round Bars
  • 17-4Ph Condition H1150D Round Bars
Get Best Quote
Approx. Price: Rs 300 / Kilogram
Synchronized with a step by step updated market, we are offering a qualitative variety of 17-4Ph Condition H1150D Round Bars. Our offered round bars are broadly demanded and acclaimed by our customers, because of its corrosion resistance, durability & long life. Furthermore, these round bars are present in diverse sizes in order to gain client’s satisfaction. Also we are giving these round bars at affordable rates to our customers.

Features:

Perfect finish
Smooth surface
Rust proof
Request
Callback
Yes! I am interested

17.4 Ph H1025 Stainless Steel Round Bar

17.4 Ph H1025 Stainless Steel Round Bar
  • 17.4 Ph H1025 Stainless Steel Round Bar
Get Best Quote
Approx. Price: Rs 295 / Kilogram

17-4 PH is a martensitic, precipitation-hardening stainless steel that provides an outstanding combination of high strength and hardness along with excellent corrosion resistance. 17-4 PH has good fabricating characteristics and can be age hardened by a single step, low temperature treatment. 17-4 PH is a versatile material widely used in the aerospace, chemical, petrochemical, food processing, paper and general metalworking industries.

 

Availability
17-4 PH is available in Bar, Wire, Forgings, Tube, Ring, Plate Sheet and Strip. View Stock List, Plate Stock List or contact Sales for further availability.

Specifications
AMS 5604 Sheet, Strip and Plate
AMS 5643 and 5622 Bars (Flat, Hex, Round, Square), Wire, Forgings, Tubing and Rings
ASTM A 693 Plate, Sheet and Strip
UNS : S17400

17-4 DBLE H1150
ASTM A 564 T 630 Cond H1150D
NACE MRO175/ISO 15156-3

17-4 PH Cond H 1150
ASTM A 564

17-4 PH Sol
AMS 5643
ASTM A 484

AMS 5604 Sheet, Strip Cold Rolled and Plate.
AMS 5622 (Vac Melt) Bars (Flat, Hex, Round, Square), Wire, Forgings, Tubing and Rings
AMS 5642 Bar
AMS 5643 Bars (Flat, Hex, Round, Square), Wire, Forgings, Tubing and Rings
MIL-S-25043
ASTM A564 Grade 630
ASTM A484 / ASME SA484
ASTM A564 / ASME SA564
ASTM A693 / ASME SA693 Plate, Sheet and Strip
WS 1.4542
X5CrNiCuNb16-4
AFNOR Z6CNU1704
UNS S17400

Services
At Aircraft Materials all stock items can be shipped out within 24 hours, usually within the same day. Even cutting orders for bar or sheet can be processed and dispatched the same day for time-critical situations such as AOGs.

Thanks to our global logistics network we can source from anywhere in the world in just a few days. We use a range of transport partners to enable us to ship overnight within the U.K. and Europe and provide fast shipping solutions to the rest of the world. If your requirement is urgent we can offer a priority shipping service, but also if time is not so critical we can offer more cost-effective options to ensure you get the best value for money. To find out more about our services click here.

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.

Request
Callback


Additional Information:

  • Minimum Order Quantity: 0 Kilogram
Yes! I am interested

18/8 Authenticate Stainless Steel Bars

18/8 Authenticate Stainless Steel Bars
  • 18/8 Authenticate Stainless Steel Bars
Get Best Quote
Approx. Price: Rs 370 / Kilogram
304 is the most common 18/8 austenitic stainless steel, very widely used in the food, pharmaceutical, breweries and chemical industries. 304 stainless is very popular in the building and domestic appliance sectors. The 304L grade has a reduced carbon content. The lower carbon content will help improve corrosion resistance after welding, and minimise carbide precipitation during the welding operation. As a stainless steel 304 has very good welding characteristics. Though continuous use of 304 stainless as high temperature is not recommended occasional service of 304 stainless up to 870ºC will give good oxidation resistance.

TypicalAnalysis

304

 

 

 

 

C.

Mn.

P.

S.

Si.

Cr.

Ni.

0.08%

2.00%

0.045%

0.03%

1.00%

18.00-

8.00-

max.

max.

max.

min.

max.

20.00%

10.50%

304L grade limits carbon to 0.03% and increased nickel tO 12%

For more information please refer the attach file.

Request
Callback
Yes! I am interested

317L Round Bars

317L Round Bars
  • 317L Round Bars
Ask For Price

317L is a molybdenum containing austenitic stainless steel, with improved corrosion resistance over 304/304L and 316/316L stainless steel. The increased levels of chromium, nickel and molybdenum over 316L stainless steel improve chloride pitting resistance and general corrosion. Through the controlled addition of nitrogen it is common for 317L to meet the mechanical properties of 317 straight grade, while maintaining a low carbon content.

Common Trade Names :
317 Stainless, 317L Stainless

Inventory :
317L Plate, 317L Coil, 317L Welding Products

Specifications :
UNS S31700, ASTM A 240, ASME SA-240
Request
Callback
Yes! I am interested

440c Round Bars Uns S44004

440c Round Bars Uns S44004
  • 440c Round Bars Uns S44004
Get Best Quote
Approx. Price: Rs 450 / Kilogram
440C Stainless Steel BarUNS S44004

Stainless steel 440C, also known as UNS S44004, principal elements are .95% to 1.2% carbon, 16% to 18% chromium, .75% nickel, with traces of manganese, silicon, copper, molybdenum, phosphorus and sulfur. Grade 440C is a high carbon martensitic stainless with moderate corrosion resistance good strength, and the ability to obtain and hold excellent hardness (Rc 60) and wear resistance. It is considered to be slightly cold workable by common practices and does respond to heat treatment.

Industries that use 440C include:
  • Machine shop
  • Tool
  • Utensils
Products partially or completely constructed of 440C include:
  • Ball bearings
  • Knives
  • Mold inserts
  • Nozzles
  • Surgical tools
  • Valves
  • Wear parts of pumps
Request
Callback


Additional Information:

  • Item Code: 155PH
Yes! I am interested

A 564 (XM-13) (UNS S13800) Stainless Steel Bar

A 564 (XM-13) (UNS S13800) Stainless Steel Bar
  • A 564 (XM-13) (UNS S13800) Stainless Steel Bar
Ask For Price
PH 13-8 Mo stainless is a martensitic precipitation/age-hardening stainless steel capable of high strength and hardness along with good levels of resistance to both general corrosion and stress-corrosion cracking. In addition, the alloy exhibits good ductility and toughness in large sections in both the longitudinal and transverse directions. The excellent properties of PH 13-8 Mo stainless are obtained through close control of chemical composition and microstructure plus specialized melting which reduces impurities and minimizes segregation. Compared to other ferrous-based materials, this alloy offers a high level of useful mechanical properties under severe environmental conditions.

13-8 Mo stainless has good fabrication characteristics and can be age-hardened by a single low temperature treatment. Cold work prior to aging increases the aging, especially for lower aging temperatures.

13-8 Mo stainless has been used for valve parts, fittings, cold-headed and machined fasteners, shafts, landing gear parts, pins, lock washers, aircraft components, nuclear reactor components and petrochemical applications requiring resistance to stress-corrosion cracking. Generally, this alloy should be considered where high strength, toughness, corrosion resistance, and resistance to stress-corrosion cracking are required in a steel showing minimal directionality in properties.

MasterSource offers a complete line of type 13-8 Mo stainless steel inventory as noted below.

ALLOY SPECIFICATIONS
13-8 MO VM
13-8 MO SS
AISI Type S13800
AISI Type XM-13
AISI 13Cr-8Ni
PH 13-8 Mo
PH 13-8 Mo VM
PH 13-8 MO Vacuum Melt
UNS S13800
CL XM-13
Class XM-13
Grade XM-13
Stainless Steel 13Cr-8Ni
TY PH 13-8 Mo
TYPE 13-8 Mo
TYPE PH 13-8 Mo
Type XM-13
X3CrNiMoAl13-8-2 AMS 2300
AMS 5629 TYPE 1
ASTM A564 Grade XM-13

Custom Shapes
Forgings
Request
Callback
Yes! I am interested

AMS 17-4 PH Stainless Steel Round Bar

AMS 17-4 PH Stainless Steel Round Bar
  • AMS 17-4 PH Stainless Steel Round Bar
Get Best Quote
Approx. Price: Rs 300 / Kilogram

17-4 PH Stainless Steel

Specification: AMS 5604, AMS 5622, AMS 5643, AMS 5825, AMS 5827, AMS 7474, ASTM A 564, ASME SA 564, ASTM A 693, ASME SA 693, ASTM A 705, ASME SA 705

17-4PH Precipitation Hardening Stainless Steel Alloy (S17400), Type 630, is a chromium-nickel-copper precipitation hardening stainless steel used for applications requiring high strength and a moderate level of corrosion resistance. High strength is maintained to approximately 600°F (316°C).The 17-4 PH stainless steel alloy is martensitic in structure in the annealed condition and is further strengthened by a low temperature treatment which precipitates a copper containing phase in the alloy. In comparison to many alloys in the precipitation hardening family, the S17400 (17-4 PH) alloy requires a simple heat treatment; a one step process conducted at a temperature in the range 900°F (482°C) to 1150°F (621°C) depending on the combination of strength and toughness desired. A wide range of properties can be produced by this one step heat treatment.

Request
Callback
Yes! I am interested

AMS 5659 Stainless Steel Round Bar

AMS 5659 Stainless Steel Round Bar
  • AMS 5659 Stainless Steel Round Bar
Get Best Quote
Approx. Price: Rs 300 / Kilogram
AMS 5659 | 15-5PH - Stainless Steel - Electrode Melted, Solution Treated - Bars Stainless Steel - S15500

15-5PH - Stainless Steel - Electrode Melted, Solution Treated - Bars

Metals Unlimited Aerospace, Inc is the leading supplier of Stainless Steel including AMS 5659
Request
Callback


Additional Information:

  • Minimum Order Quantity: 0 Kilogram
Yes! I am interested

AMS 5862 (BMS 7-240) 15-5PH Plate

AMS 5862 (BMS 7-240) 15-5PH Plate
  • AMS 5862 (BMS 7-240) 15-5PH Plate
Get Best Quote
Approx. Price: Rs 400 / Kilogram
15-5 PH Stainless Steel

15-5 PH® is a martensitic, precipitation hardening stainless steel. Good in corrosive, high-pressure environments, it is ideally suited for several industries, including aerospace, petrochemical, chemical and food processing. 15-5 PH stainless steel offers exceptional performance for applications such as gears, shafts, fittings, valves and fasteners. In addition to corrosion resistant properties, 15-5 PH has good strength, transverse toughness and ductility in comparison to 304 stainless steel.

Composition of 15-5 PH Stainless Steel

The composition of 15-5 PH stainless steel includes high levels of chromium, nickel and copper. Carbon, manganese, phosphorus, sulfur, silicon and columbium plus tantalum may also be present in trace amounts, with each not exceeding 1 percent of the compositional total.

Heat Treated 15-5 PH Stainless Steel

Heat treatments are used to strengthen 15-5 alloys. There are eight standard conditions for 15-5 stainless steel after treatment - H 900, H 925, H 1025, H 1075, H 1100, H 1150, H 1150 1150 and H 1150-M. Heat treating 15-5 PH follows the following steps:

  1. Conditioning using austenite.
  2. Air cooling, which turns the austenite into martensite.
  3. Precipitation hardening until the desired condition is reached.

15-5 PH can be further heat-treated when in precipitation-hardened condition to provide improved resistance to stress corrosion cracking for high temperature applications. Fabrication is recommended after the metal has been heat treated to minimize distortion and stress.

Request
Callback


Additional Information:

  • Minimum Order Quantity: 0 Kilogram
Yes! I am interested

Nitronic 60 Round Bars

Nitronic 60 Round Bars
  • Nitronic 60 Round Bars
Get Best Quote
Approx. Price: Rs 1,500 / Kilogram

Nitronic 60 Alloy Bar
Nitronic 60 Stainless Steel is an austenitic alloy, considered to have the best galling resistance of the entire range of Stainless Steels.

 

Characteristics of Nitronic 60 include

  • High pitting resistance

  • Outstanding corrosion resistance

  • Good high temperature properties for temperatures around 982 degrees Centigrade.

  • Oxidation resistance

  • Grevice corrosion and chloride pitting resistance is greater than Stainless Steel 316.

 

Nitronic 60 can be formed using common forming techniques, and pre-heating is not required to weld Nitronic 60.

Common welding methods such as gas metal arc, gas tungsten arc and submerged arc can be used to weld Nitronic 60. Hardening Nitronic 60 Stainless Steel calls for the alloy to be cold worked.
Primary Elements:

 

  • Between 16 and 18 percent Chromium

  • 8 to 9 percent Nickel

  • 7 to 9 percent Manganese

  • 3.5 to 4.5 percent

Request
Callback
Yes! I am interested

Stainless Round Bars

Stainless Round Bars
  • Stainless Round Bars
Get Best Quote
Approx. Price: Rs 280 / Kilogram
Manufacturer and supplier of stainless round bars.
Request
Callback


Additional Information:

  • Item Code: 174PH
Yes! I am interested

Stainless Steel 15-5 PH Bars

Stainless Steel 15-5 PH Bars
  • Stainless Steel 15-5 PH Bars
Get Best Quote
Approx. Price: Rs 300 / Kilogram
Stainless Steel15-5 PH*15-5 PH is a
stainless steel offering high strength and hardness with excellent corrosion resistance.Stainless Steel 15-5 PH can be age-hardened by a
low temperature treatment.Stainless Steel 15-5 PH has been used for applications for requiring high strength and toughness, such as valve
parts, fitting, and fasteners, gears, engine parts, paper mill equipment, and aircraft components. Available forms are seamless pipe,
welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specifications

AMS 5658, AMS 5659, AMS 5862, ASTM A564 XM-12, ASTM

Chemical Analysis

C.07
Mn1.00
Ph.03
S.015
Si1.00
Cr14.00 - 15.50
Ni3.50 - 5.50
Mo.50
Cu2.50 - 4.5
Cb Ta8xc min -
Request
Callback
Yes! I am interested

UNS S15500 (XM-12) Stainless Steel Round Bar

UNS S15500 (XM-12) Stainless Steel Round Bar
  • UNS S15500 (XM-12) Stainless Steel Round Bar
Get Best Quote
Approx. Price: Rs 335 / Kilogram
15-5 PH (UNS S15500 (XM-12)

15-5 PH stainless steel was designed to have greater toughness than 17-4 PH. The 15-5 alloy is martensitic in structure in the annealed condition and is further strengthened by a relatively low temperature heat treatment which precipitates a copper containing phase in the alloy. 15-5 is also referred to as XM-12 in some specifications.

Chemistry
NiCrMnCuSiCb TaCPSFe
MIN3.514.0-2.5-0.15----
MAX5.515.51.04.51.00.450.070.040.03Balance
SpecificationsAMS 5659, AMS 5862, AMS 5862J Type 2
ASME SA 564, ASME SA 693, ASME SA 705
ASTM A 564, ASTM A 693, ASTM A 698, ASTM A 705, ASTM-A564 (XM-12)
BAC 5439 Rev H Class A Type1
BMS 7-240 (Boeing)
BSS7055 Rev A
STD 2154
UNS S15500
W. Nr./EN 1.4545

 

Inventory

15-5 Flat Bar, 15-5 Plate, 15-5 Round Bar

Common Trade Names15-5 Stainless, 15-5 PH

 

Features
  • Precipitation Hardening
  • High Strength
  • Moderate corrosion resistance to 600°F
Applications
  • Aerospace applications
  • Chemical and petrochemical applications
  • Pulp and paper
  • Food processing
Physical Properties

Density: 0.280 lb/inch3
Poisson's Ratio: 0.272
Electrical Resistivity: 589 Ohm-circ mil/ft

Request
Callback
Yes! I am interested

UNS S20910 Round Bars

UNS S20910 Round Bars
  • UNS S20910 Round Bars
Get Best Quote
Approx. Price: Rs 820 / Kilogram
Chandan Steel World UNS S20910 ROUND BARS:XM-19HS and XM-19A (UNS S20910)

DESCRIPTION:
Alloy XM-19 is a nonmagnetic austenitic stainless alloy with high strength and good corrosion resistance. It has nearly double the yield strength of 304 and 316 stainless steel. It remains non-magnetic even after being severely cold worked. It maintains strength at high temperatures as well as sub-zero temperatures.
It is supplied in the high strength (warm worked), as well as the solution annealed condition.
Material is processed via EAF and AOD refined.

 

 

SIZES AVAILABLE TO ORDER:
Alloy XM-19 HS
Round Bar: .5” (12.7mm ) – 10.0” (254mm)

Alloy XM-19A
Round Bar: .5” (12.7mm ) – 8” (203.2mm)

SPECIFICATIONS: ASTM A-276; ASTM A-314; ASTM A-479; NACE MR0175; AMS 5764E(Chemistry only); ISO 15156; API 6APSL3

Request
Callback


Additional Information:

  • Minimum Order Quantity: 0 Kilogram
Yes! I am interested

UNS S42200 (AMS 5655) Stainless Steel Bar

UNS S42200 (AMS 5655) Stainless Steel Bar
  • UNS S42200 (AMS 5655) Stainless Steel Bar
Get Best Quote
Approx. Price: Rs 500 / Kilogram
This grade is Martensitic Cr Steel is a standard Martensitic, which is also known as plain chromium steel. Sometimes used in the annealed condition, 422 stainless steel bars achieve its best corrosion resistance when hardened then stress relieved. Applications are Gas Turbine, Steam Turbine, Oil and Gas compressor Parts.

 

Key Words: Allvac, an Allegheny Teledyne Company, UNS S42200; AMS 5655. B50A125. AISI 422; M-8663; ASTM A 565. PDS 10705 AJ

Applications: Jet engine parts, brackets, disks, bolts, blades fasteners, aircraft components. Parts for steam and gas turbines, engines.

Request
Callback


Additional Information:

  • Item Code: Bars
  • Minimum Order Quantity: 0 Kilogram
Yes! I am interested

UNS-S17400 Stainless Steel Bars

UNS-S17400 Stainless Steel Bars
  • UNS-S17400 Stainless Steel Bars
Get Best Quote
Approx. Price: Rs 200 / Kilogram
Stainless steel 15 – 5 PH®, also known as UNS S15500 or XM-12, is a modification of 17-4 PH developed in the 60′s. UNS S15500 stainless steel has a more refined microstructure as a result of the remelting process in which it was developed. This refined structure enhances toughness, especially in the transverse direction of the material. UNS S15500 also has excellent corrosion resistance, good fabricating characteristics and low temperature hardening which makes Stainless Steel 15 – 5 PH® the preferred alloy for many industries.

The composition of UNS S15500 includes small amounts of carbon, manganese, phosphorus, columbium (or niobium), tantalum, silicon and sulfur. 15500 can be forged, welded and formed. Machining may be performed in the solution-annealed state or in the final heat treat condition. Desired mechanical properties such as ductility and strength can be achieved through heating the material at various temperatures.

UNS S15500 is a martensitic precipitation hardening grade. Martensitic stainless steels were designed as a type of alloy which is corrosion resistant and could also be hardened through heat treatment.
Industries that use 15500 include:
Aerospace
Chemical
Food processing
General metal working
Paper industries
Petrochemical
Products partially or completely constructed of 15500 include:
Aircraft components
Cylinders
Engine parts
Fittings
Gears
Hallow shafts
Marine gas turbine compressor sections
Paper mill equipment
Shafts
Valves
Request
Callback
Yes! I am interested

UNS13800 Stainless Steel Round Bar

UNS13800 Stainless Steel Round Bar
  • UNS13800 Stainless Steel Round Bar
Get Best Quote
Approx. Price: Rs 750 / Kilogram
Alloy 13-8 PH stainless steel is a precipitation, age hardenable stainless steel. Stainless Steel 13-8's principal features are toughness, good resistance to general and stress corrosion cracking, and high strength that is developed by a single low temperature heat treatment.

Applications: SS 13-8 has been used in aircraft components such as landing gear and structural sections, valves, shafts, and components in the petrochemical and nuclear industries.

Specifications: Alloy 13-8, UNS S13800
1) 13-8 PH Stainless Steel: AMS 5629, DMS 2100, STM-05-602, STO160LB0013, ASTM-A564 (XM-13), AMS 5864, BMS7-322, RMS 150, PWA/LCS, GE S400, AMS-H-6875, AMS 2759, AISI 632, ASTM-A693 (XM-13), ASTM-A705 (XM-13), DIN 1.4534, UNS S13800, Werkstoff 1.4548

13-8 Solution Annealed Round Bar Per AMS 5629 Type 1 (Heat treated to H1025)

13-8 Stainless Steel Plate Per AMS 5629, ASTM A-564/693, AMS 5864

13-8 Stainless Steel Flat Bar Per AMS 5629, Can be heat treated to H1000 Per AMS 2759/3 DMS 2100

13-8 Stainless Steel Round Bar Per AMS 5629, Can be heat treated to H1000 Per AMS 2759/3

UNS S13800, Capable of ASTM-A564, Centerless Ground Bar

13-8 Stainless Steel Square Bar Per AMS 5268

13-8 Stainless Steel Hex Bar Per AMS 5268
Request
Callback
Yes! I am interested

XM-19 Round Bars

XM-19 Round Bars
  • XM-19 Round Bars
Get Best Quote
Approx. Price: Rs 800 / Kilogram

NITRONIC® 50 (XM-19) (UNS S20910)

Austenitic Stainless

NITRONIC 50 Stainless Steel provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range. This austenitic stainless has corrosion resistance greater than that provided by Types 316 and 316L, plus approximately twice the yield strength at room temperature. In addition, Armco NITRONIC 50 Stainless has very good mechanical properties at both elevated and sub-zero temperatures. And, unlike many austenitic stainless steels, NITRONIC 50 does not become magnetic when cold worked.

High Performance Alloys can make hot rolled, cold worked, & strain hardened High Performance Stainless Steel (HPSS) bars in house. Ask for our GFM Bulletin for more information about our bar processing capabilities. We have expanded to enhance product availability. See more information on NITRONIC 50 HS (High Strength) properties on the NITRONIC 50HS page.



Applications
Superior corrosion resistance
Almost double the yield strength
Exceptionally low magnetic permeability
Outstanding cryogenic properties
Outstanding corrosion resistance gives Armco's NITRONIC 50 Stainless Steel the leading edge for applications where Types 316. 316L, 317 and 317L are only marginal. It's an effective alloy for the petroleum, petrochemical, chemical, fertilizer, nuclear fuel recycling, pulp and paper, textile, food processing and marine industries.
Components using the combination of excellent corrosion resistance and high strength currently include pumps, valves and fittings, fasteners, cables, chains, screens and wire cloth, marine hardware, boat and pump shafting, heat exchanger parts, springs and photographic equipment.
Fastener - High strength, and higher strength fasteners can improve the durability of you equipment
Marine hardware - Mastings, tie downs
Marine and Pump shafts - better corrosion than types 304 and 316, with double the yield strength.
Valves and fittings - better corrosion than types 304 and 316, with double the yield strength.
Downhole rigging - better corrosion than types 304, 316 and 17-4, with double the yield strength in annealed condition.
Reduced cross sections - better corrosion than types 304, 316 and 17-4.

Request
Callback
Yes! I am interested
X
Looking for “Stainless Steel Round Bars”?


Reach Us
Rajesh Chandan (Director)
No. 65/73, Habib Building, 1st Floor, Office No. 24 2nd Panjrapole Lane, C. P. Tank
Mumbai- 400004, Maharashtra, India


Call Us

Send E-mail

Send SMS